Datalogic A30 Скачать руководство пользователя страница 2

Страница: 2 / 64

Datalogic Automation, Inc.

6301 West Old Shakopee Rd Suite A

Bloomington MN 55438

USA

A30™ Hardware Guide

Edited: 08/2013



Protected to the fullest extent under

U.S. and international laws. Copying or altering of this document is prohibited without express written

consent from Datalogic Automation, Inc. (DLA)

Datalogic and the Datalogic logo are registered trademarks of Datalogic S.p.A. in many countries,

including the U.S.A. and the E.U.

A30, Vision Program Manager, Control Panel Manager, and Impact are trademarks of Datalogic

Automation S.r.l. All other brand and product names mentioned herein are for identification purposes only

and may be trademarks or registered trademarks of their respective owners.

DLA makes no representations or warranties for merchantability or fitness for any particular purpose,

regarding DLA’s software or hardware. DLA shall not be liable for errors contained herein or for incidental

or consequential damages in connection with the furnishing, performance, or use of this publication or its

contents.

DLA reserves the right to revise this publication from time to time and to make changes in the content

hereof without obligation to notify any person of such revision or changes.

Printed 2 August 2013

Содержание A30

































































Результаты поиска

Содержание A30

Отзывы:

Похожие инструкции для A30

Бренды по названию

Популярные бренды

Datalogic A30, Руководство по оборудованию

Результаты поиска

Содержание A30

Отзывы:

Похожие инструкции для A30

Бренды по названию

Популярные бренды