DKG-309 User Manual
(11.05.2009)
10. EVENT LOGGING
The unit keeps record of the last
The genset status information and a
event memory. The events are recorded with a time stamp
clock circuit of the unit.
The events are stored in a circular memory. This means that a new coming
recorded event. The events are always displayed starting from the most recent one.
Events are kept in a non-volatile memory and are not affected from power failures.
Switching from one menu screen
When the
EVENT RECORD
screen
display switch to the previous event and
To exit event record pages please hold pressed
Each event is displayed in
4
pages
display. Events are numbered starting from 1
to D.
Navigation between different pages of the same event is done with
Event sources are:
-Shutdown alarms, Load dump alarms,
-Operating mode change (OFF, AUTO, etc…)
-Periodic records.
Event record contents are:
Event type (alarms, mode change, periodic, etc…)
Date and time
Genset operating mode (AUTO, MANUAL,OFF,TEST
Genset operation status (
Genset phase voltages L1
Genset phase currents L1
Genset frequency
Genset active power (KW)
Genset power factor
Engine rpm
Oil pressure
Coolant temperature
Fuel level
Battery voltage
Mains phase voltages L1
Mains frequency
Digital input statuses
Charge input status
keeps record of the last
100
events in order to supply information for the service personal.
The genset status information and a comprehensive set of measured values are stored within the
The events are recorded with a time stamp which comes from the internal real time
The events are stored in a circular memory. This means that a new coming event will erase the oldest
recorded event. The events are always displayed starting from the most recent one.
volatile memory and are not affected from power failures.
screen to another is made with the
◄
MENU
and
MENU
screen is displayed, each depression on the
◄
MENU
event and
MENU
►
button makes the display switch to the
To exit event record pages please hold pressed
◄
MENU
or
MENU
ages. Event and page numbers are shown at the top right corner of the
starting from 1, number 1 being the latest one. Pages are listed
Navigation between different pages of the same event is done with
▼
and
▲
Load dump alarms, Warnings
Operating mode change (OFF, AUTO, etc…)
Event type (alarms, mode change, periodic, etc…)
Genset operating mode (AUTO, MANUAL,OFF,TEST, LOAD TEST)
Genset operation status (mains ok, running, cooldown etc…)
Genset phase voltages L1-L2-L3
Genset phase currents L1-L2-L3
Genset active power (KW)
L1-L2-L3
V-02
- 25 -
events in order to supply information for the service personal.
comprehensive set of measured values are stored within the
comes from the internal real time
event will erase the oldest
recorded event. The events are always displayed starting from the most recent one.
volatile memory and are not affected from power failures.
MENU
►
buttons.
MENU
button makes the
switch to the next event.
MENU
►
buttons.
Event and page numbers are shown at the top right corner of the
, number 1 being the latest one. Pages are listed from
A
▲
buttons.
