Datakom D-500, Руководство пользователя

Страница: 9 / 153

D-500 User Manual Rev_06 Firmware V-5.8
K35D05-EN - 9 -
30. LOAD TRANSFER MODES
30.1. TRANSFER WITH INTERRUPTION
30.2. UNINTERRUPTED TRANSFER
31. DATA RECORDING
31.1. DATA RECORDING MEDIA
31.2. DIRECTORY STRUCTURE
31.3. UNDERSTANDING THE CSV FORMAT
31.4. RECORDED DATA LIST, RECORD PERIOD
32. SOFTWARE FEATURES
32.1. LOAD SHEDDING / DUMMY LOAD
32.2. LOAD ADD / SUBSTRACT
32.3. FIVE STEP LOAD MANAGEMENT
32.4. REMOTE START OPERATION
32.5. DISABLE AUTO START, SIMULATE MAINS
32.6. BATTERY CHARGING OPERATION, DELAYED SIMULATE MAINS
32.7. DUAL GENSET MUTUAL STANDBY OPERATION
32.8. MULTIPLE VOLTAGE AND FREQUENCY
32.9. SINGLE PHASE OPERATION
32.10. EXTERNAL CONTROL OF THE UNIT
32.11. AUTOMATIC EXERCISER
32.12. WEEKLY OPERATION SCHEDULER
32.13. ENGINE HEATING OPERATION
32.14
. ENGİNE IDLE SPEED OPERATİON
32.15. ENGINE BLOCK HEATER
32.16. FUEL PUMP CONTROL
32.17. GAS ENGINE FUEL SOLENOID CONTROL
32.18. PRE-TRANSFER SIGNAL
32.19. CHARGING THE ENGINE BATTERY
32.20. EXTERNALLY CONTROLLED DIGITAL OUTPUTS
32.21. COMBAT MODE
32.22. RESETTING THE CONTROLLER
32.23. AUTOMATIC CONNECTION TOPOLOGY DETERMINATION
32.24. ZERO POWER AT REST
33. MODBUS COMMUNICATIONS
33.1. PARAMETERS REQUIRED FOR RS-485 MODBUS OPERATION
33.2. PARAMETERS REQUIRED FOR MODBUS-TCP/IP VIA ETHERNET
33.3. DATA FORMATS
34. SNMP COMMUNICATIONS
34.1. PARAMETERS REQUIRED FOR SNMP THROUGH ETHERNET PORT
34.2. SNMP TRAP MESSAGES