Copyright © 2008 – 2019 DARE!! International
Page 23
4.
Using the RadiSense
4.1
Manual Control
Once the RadiCentre
is switched on, the RadiSense
can be activated from the ‘main’ screen on the
RadiCentre touchscreen.
4.1.1
Starting the LASER powered sensor
The LASER of the RadiSense 10 field sensor can be started from the ‘main’ window of the
RadiCentre. To activate the sensor, press the ‘Start’ button for the required sensor and, within 4
seconds, the ‘ACK’ button. A short sound will be audible until the safety loop is closed
successfully.
As long as the LASER is activated, the front and rear ‘LASER ON’-LED’s will light up to indicate
LASER operation.
4.1.2
Zeroing the probe
The ‘Status’ box will now indicate “Press this button to zero” and after pressing this button the
zeroing of the probe will be started.
