Copyright © 2008 – 2019 DARE!! International
Page 19
3.3
Software Configuration
To control the RadiSense from a computer, one can use either custom made software or the
RadiMation EMC software package from DARE!! Instruments, which can be downloaded from the
DARE!! Instruments website. If the RadiSense is operated manually, this chapter can be skipped.
If RadiMation software is used; select the required device driver for the RadiSense.
3.3.1
RadiMation Freeware driver
1.
After the RadiMation software is installed and started, select ‘Devices’ in the menu
screen and ‘Add Field Sensor’ to select the driver for the RadiSense / RadiCentre:
2.
A new screen is shown, where the applicable product code of the RadiSense /
RadiCentre can be selected. In this example, we add the RSS2010B driver for the
RadiSense 10 field probe and click on ‘New’.
3.
Define the name of the new driver and save it by pressing ‘OK’.
