Copyright © 2008 – 2019 DARE!! International
Page 21
7.
For controlling the RadiSense probe from a RadiCentre 2-slot or 7-slot system
(CTR1004B or CTR1009B) select under the tab “RadiCentre” the “RadiCentre Multi-
slot’ and define the corresponding slot number in which the RadiSense probe is
installed. In this example the probe is installed in slot number
4.
8.
Upon completion of the correct settings of the communication interface click on
‘OK’.
9.
Under the ‘Field probe’ tab the measurement settings of the RadiSense 10 probe
can be configured. The default settings are automatically taken and shown below.
Different measurement settings can be defined by the user.
