Copyright © 2008
–
2019 DARE!! International
Page 27
4.1.2
Zeroing the probe
The ‘Status’ box will now indicate “Please Zero” and a ‘ZERO’ button will appear directly behind the
‘STATUS’ box. Press ‘ZERO’ to start zeroing the probe. As soon as the probe is zeroed, the ‘STATUS’
box will turn green, and the measured field strength is displayed in the ‘STATUS’ box of the probe
.
Figure 15: Zeroing the Radi
S
ense
®
probe in the main screen
The E-field sensor is now powered on and will return optical data to the Radi
C
entre
®
system.
As long as the probe returns optical data, the LASER will continue to power the sensor. If the loop
is interrupted, the LASER will switch off immediately.
4.1.3
Reading probe data
Readings from the probe can be taken directly from the TFT screen, with the Radi
M
ation
®
EMC
software or any other (custom made) software package.
4.1.4
Band selection Radi
S
ense
®
RSS1004
2
The measurement bandwidth of the Radi
S
ense
®
RSS1004 can be set to ‘low’, ‘high’ or ‘full’.
•
‘low’ bandwidth = 9 kHz –
4 MHz
•
‘high’ bandwidth = 4 MHz –
4 GHz
•
‘full’ bandwidth = 9 kHz –
4 GHz
2
This option is not available for the other Radi
S
ense
®
models; RSS1006 and RSS1018.
