Copyright © 2008
–
2019 DARE!! International
Page 17
2.7.2
LASER activation - Radi
C
entre
®
Single
The Radi
C
entre
®
Single does not have a touchscreen, as a result the LASER code safety feature
(mentioned in chapter 2.7.1) cannot be used. Instead a specific activation procedure combined
with auditory warnings is used.
To activate the LASER in the Radi
C
entre
®
Single, follow these steps:
1.
Press the ‘Start’ button on the back panel (of the
Radi
C
entre
®
) and hold it.
2.
Five loud ‘beeps’ can be heard; four short followed by one long.
3.
On the fifth ‘beep’ the LASER link is activated and the red ‘LASER ON’ LED (on the
Radi
S
upply
®
card) lights up.
4.
Release the ‘Start’ button.
This means that:
•
If you want to interrupt the activation process, all you have to do is release the
‘Start’ button (before the fifth ‘beep’). The LASER will not be activated.
•
If you are interrupted du
ring the activation process (and release the ‘Start’ button
by accident), the LASER will not be activated.
•
If you press the button by accident (and do not wish to activate the LASER), the
auditory warning will alert you to this action.
