Copyright © 2008
–
2019 DARE!! International
Page 15
2.7.1
LASER code
As a safety precaution, products that use a LASER can only be turned on using a LASER Code. This
code can be entered into the system by tapping the touchscreen of the Radi
C
entre
®
.
(This safety feature is linked to the Radi
C
entre
®
2- and 7-slot version. The LASER activation and
safety is implemented differently in the Radi
C
entre
®
Single, see chapter 2.7.2.)
To meet the LASER safety precaution, enter the LASER Code in the ‘LASER Code’ screen and press
‘
OK
’
for confirmation (see Figure 8).
The default LASER code is:
3447
This code can be changed by the customer in the main configuration screen (see Figure 9).
To change the laser code, the user will be asked to enter the current code ones and the new code
twice (for confirmation)
. Press ‘Close’ to leave each notification and enter the code in th
e
following numeric window (see Figure 10).
Figure 8: LASER code window
