DLR-6/6P Low-Rise Scissor Lifts
17
P/N 5900254 — Rev. A — September 2020
Anchor the Power Unit Stand (DLR-6 only)
The DLR-6 comes with a Power Unit Stand to hold the supplied Power Unit; it can be on either side of
the Lift. The Power Unit Stand
must
be anchored.
Not necessarily to scale. Not all components shown.
To anchor the Power Unit Stand
:
1.
Select an appropriate site for the Power Unit Stand.
2.
Locate the Power Unit Stand and two Anchor Bolts (¾" wide, 4 ¾" deep, same size as the Anchor
Bolts holding down the Lift).
3.
Follow the anchoring instructions from the previous procedure to anchor the Power Unit Stand.
See
4.
Once the Power Unit Stand is anchored, attach the Power Unit to it using the supplied M8 x 20
Bolts, M10 Washers, and M8 Nuts.
⚠
CAUTION
The Power Unit is heavy and awkward; we recommend having at least two people
work together to attach the Power Unit to the Power Unit Stand.
5.
Use an appropriate tool to securely tighten the connections.
Содержание DLR-6
