Dannmar DLR-6, Инструкция по установке и эксплуатации

Страница: 28 / 40

DLR-6/6P Low-Rise Scissor Lifts
28
P/N 5900254 — Rev. A — September 2020
If the Lift becomes unstable or the Vehicle starts moving, release the Raise button immediately.
15. When the Platforms are just past the desired height, release the
Raise
button.
16. Press the Lowering Handle to move the Platforms back down, which engages them on the most
recently passed Safety Lock.
If you miss the Safety Lock, press and hold
Raise again and go somewhat further past the Safety
Lock, then hold the Lowering Handle again to engage the Lift on the Safety Lock.
The following drawing shows the Release Cam in the locked position.
Side View. Not drawn to scale. Not all components are shown.
⚠
WARNING Do
not
begin work on the Vehicle without first confirming that the Lift is securely
engaged on a Safety Lock.
Lowering a Vehicle
This section describes how to lower a Vehicle from a raised position.
To lower a Vehicle :
1. Check the items listed in Lift Operation Safety .
If you find any issues, resolve them before lowering the Vehicle.
Only use the Lift if it can be used safely .
2. Press the Raise button for a second or two, to move the Platforms off the Safety Lock.
The following drawing shows the Release Cam in the unlocked position.
Side View. Not drawn to scale. Not all components shown.
3. Press and hold the Lowering Handle.
4. Release the Lowering Handle when the Lift is fully lowered.
5. Remove the Lifting Arms and then carefully drive the Vehicle off the Lift.