![background image](http://html1.mh-extra.com/html/dannmar/b-200/b-200_installation-and-user-manual_3431447008.webp)
Pag
e
6
5. INSTALLATION
5.1 Installation area
To install the machine you need a useful space on the basis of the information given in picture F5.1.
Picture F5.1
From working position, the user must be able to view the machine and the surrounding area.
INSTALLATION AREA MUST BE KEEP CLEAR BY POSSIBLE DANGEROUS OBJECTS.
UNAUTHORIZED PERSONNEL MUST NOT STAND NEAR BY THE WORKING AND INSTALLATION AREAS.
THE MACHINE MUST BE PLACED ON A HORIZONTAL SURFACE RATHER MADE OF CONCRETE OR TILED.
AVOID BREAKABLE AND ROUGH SURFACES.
SURFACE MUST ENDURE THE STRESS LOAD DURING THE MACHINE OPERATION.
THE MACHINE MUST BE FIXED ON THE FLOOR WITH SCREWS AND EXPANSION PLUGS IN ACCORDING TO
FOLLOWING INSTRUCTIONS.
THE USE OF THE MACHINE IS ONLY ALLOWED IN PLACES THAT DO NOT PRESENT RISKS OF EXPLOSION OR
FIRE.
6. SUSPENSION OF THE USE
In case the machine is not used for a long time it is necessary to disconnect the power supply and protect all parts that could be
damaged by dust. Grease all parts that could be damaged in case of oxidation. In this specific case, protect the shaft and flange.
7. ENVIRONMENTAL INFORMATION
THE DISPOSAL PROCEDURE DESCRIBED BELOW ONLY APPLIES TO MACHINES
WITH THE SYMBOL OF THE WASTE BIN WITH A BAR ACROSS IT ON THEIR DATA
PLATES.
The crossed-out bin symbol, placed on the product and on this page, reminds the user that the product must be disposed of
properly at the end of its life. This product may contain substances that can be hazardous to the environment and to human health
if it is not disposed of properly. We are therefore providing you with the information below in order to prevent these substances
from being released into the environment and to improve the use of natural resources.