![background image](http://html1.mh-extra.com/html/dannmar/b-200/b-200_installation-and-user-manual_3431447035.webp)
Pag
e
33
18.3 Electromagnetic clamping brake
The electromagnetic clamping brake is useful to block the wheel in any position and to simplify some operations such as the
application or removal of balancing weights.
The electromagnetic clamping brake is also used in the automatic or manual stopping of the wheel on imbalance positions
described in chapter 18.5
Wheel stop procedure on the positions of imbalance.
To activate and/or deactivate the ELECTROMAGNETIC BRAKE proceed as follows:
Op.
Description
10
and select
Press [2] or [4] from the keyboard
the icon relative to the program to be used.
20
(by default at
Activate the BRAKE ENABLING program by selecting
start-up) which will turn green.
30
Scroll through the list of available programm by pressing [1] or [3] on the
keyboard
.
40
Activate BRAKE DISABLING by selecting
.
The electromagnetic clamping brake is deactivated automatically in the following cases:
Every time a balancing launch is run;
Every time a wheel stop procedure is performed (stop of the wheel on the imbalance position) at low speed;
After one minute of continuous activation (to avoid overheating of the brake itself).
The electromagnetic clamping brake can be used manually only in NORMAL mode. It cannot be used in the SERVICE mode.