![background image](http://html1.mh-extra.com/html/dannmar/b-200/b-200_installation-and-user-manual_3431447006.webp)
Pag
e
4
Storage:
The machine should not be exposed and should be covered with the plastic film. The machine should be stored in the
warehouse of ventilation, dry and waterproof. In the storage area, the temperature should be controlled in the range of -10
℃
~
55
℃
and RH should be controlled in the range of 30%
~
90%. It is forbidden to store the machine together with the dangerous chemical,
the inflammable and explosive materials or the objects easy to born the dust.
Transportation
:
The load of the machine should be accordance with the indication on the outer package and fix firmly. No matter
what kind of transportation, the environment temperature and humidity should comply with the requirement of the storage
requirement specified in term2.2. It is forbidden transport the machine together with the dangerous chemicals, inflammable and
explosive materials or the objects easy to born the dust.
Installation
After confirming the package of the wheel balancer intact, you can carry the machine to the installation area as shown in the Fig1
Environment requirement at the installation site: Temperature 0
℃
-50
℃
,
RH≤85%, without water source, fire source, dust,
inflammable and explosive materials and the chemicals. The floor should be flat and solid.
Before installation, detach the upper cover of the package box of the wheel balancer and confirm the machines, accessories
shipped together with the machine and the data you purchase according to the packing list. If you have any question, you can
contact with the dealers. The packing material such as plastic, polystyrene, nail, screw, wood and the carton must be placed into a
scrap box and handle according to the local law and regulation. When install, detach the connect bolt between the wheel balancer
and the pallet of the package box and move the machine from the pallet to the installation position. To guarantee the safety and
fast of the operation, there should be the distance more than 300cm from the wall of the building to the right and rear of the
machine. And the distance of more than 200cm from the wall of the building to the left of the machine. After the wheel balancer is
moved to the proper position, drill 3 anchor holes on the ground according to the installation hole at the foot of the machine and
then use 3 pieces of M10X160 anchor screws to fix the machine on the ground to guarantee the stability and reliability of the
machine.
If the machine is not packed, observe following precautions:
PROTECT THE SHARP EDGES AT THE ENDS WITH SUITABLE MATERIAL (Bubble wrap or cardboard).
DO NOT USE METAL WIRE ROPES FOR LIFTING BOARD.
SLING WITH STRAPS OF AT LEAST 200 cm IN LENGHT AND WITH A HIGHER FLOW RATE OF 500 kg.
DO NOT FORCE ON SHAFT AND/OR FLANGE.
ALWAYS UNPLUG THE POWER SUPPLY CABLE FROM THE SOCKET BEFORE MOVING THE MACHINE.