![background image](http://html1.mh-extra.com/html/dannmar/b-200/b-200_installation-and-user-manual_3431447032.webp)
Pag
e
30
17.
SECOND OPERATOR
The machine has two separate memories allowing two operators to work simultaneously with different settings.
This feature can make operations at the workshop quicker because when, for example, an operator is busy with removing
or remounting a t
i
re, the other operator can use the machine to perform balancing operations and vice versa.
In this manual, the two operators are defined as
operator 1
and
operator 2
.
When operator 1 has completed his tasks on the machine or is involved in other activities, operator 2 can work with the machine
using the settings for the wheel type he is working on without altering the settings entered by operator 1.
When the machine is switched on, the two memories are set with the same values by default.
To select the SECON OPERATOR Program, proceed as follows:
Op.
Description
10
Press [2] or [4] from the keyboard
and select the
icon relative to the programme to be used.
20
Activate the program for 1 OPERATOR by selecting
(by default at
start-up) which will turn green.
30
Scroll through the list of available programs by pressing [1] or [3] on
.
40
Activate the program for 2 OPERATORS by selecting
.