![background image](http://html1.mh-extra.com/html/dannmar/b-200/b-200_installation-and-user-manual_3431447025.webp)
Pag
e
23
14.3.2 Automatic acquisition of the wheel dimensions for the ALS1, ALS2 program types
To automatically enter the dimensions of the wheel in the ALS1 and ALS2 program types proceed as follows:
Op.
Description
10
Fit the wheel on the shaft and tighten with the ring nut.
20
Press [2] or [4] from the keyboard
and select
the icon relative to the programme to be used.
30
Activate the STANDARD programme by selecting
(by default at start-
up) which will be outlined in green.
Scroll through the list of available programmes by pressing [1] or [3] on the
keyboard.
-
-
-
-
-
-
40
Activate the ALS programme by selecting
or
.
50
Extract the Distance/Diameter sensor and place it on the plane chosen as the
internal plane. The position is different depending on the programs selected
ALS1 or ALS2.
ALS1:
The white weight represents the internal weight on the clip. See
figure here.
ALS2: The blue weight represents the adhesive internal weight. See figure here.
Automatic
acquisition
of
the
internal
plane
distance
and
diameter in ALS1 Program Type
Automatic
acquisition
of
the
internal
plane
distance
and
diameter in ALS2 Program Type