Danfoss VLT Integrated Servo Drive ISD 510 System, Руководство по эксплуатации

Страница: 67 / 102

LED Color Flash status Description
Aux 2 Green – State of the auxiliary
voltage on line 2.
On Statemachine is in
state
Standby , Power
up , or Operation
enabled . Auxiliary
voltage is applied to
the output connectors
on line 2.
Off Statemachine is in
state
U
AUX
disabled or
Fault . Auxiliary voltage
is not applied to line 2.
Safe 1 Green On 24 V for STO is present
on line 1.
Off 24 V for STO is not
present on line 1.
Safe 2 Green On 24 V for STO is present
on line 2.
Off 24 V for STO is not
present on line 2.
SAB
STAT Green On SAB is in state
Operation enabled .
Flashing Auxiliary voltage is
applied at the input.
Off No auxiliary voltage is
applied at the input.
Red On The SAB is in state
Fault .
Flashing Mains is not applied at
the input.
NET
STAT Green/
red Fieldbus dependent. Network status of the
device (see
corresponding fieldbus
standard).
Link/A
CT X1 Green – Link/activity status of
In .
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
Link/A
CT X2 Green – Link/activity status of
Out .
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
LED Color Flash status Description
Link/A
CT X3 Green – Link/activity status of
line 1.
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
Link/A
CT X4 Green – Link/activity status of
line 2.
On Ethernet link
established.
Flashing Ethernet link
established and active.
Off No link.
Table 7.4 Legend to Illustration 7.2
Operation Operating Instructions
MG75K102 Danfoss A/S © 12/2015 All rights reserved. 65
7 7