Danfoss VLT Integrated Servo Drive ISD 510 System, Руководство по эксплуатации

Страница: 10 / 102

- Firmware for the servo drive
-
Firmware for the SAB
- PC software tool: ISD Toolbox
- PLC libraries
•
Danfoss Motion library for VLT
®
Integrated Servo Drive ISD 510
system for AutomationStudio
™
•
Danfoss Motion library for VLT
®
Integrated Servo Drive ISD 510
system for TwinCAT
®
2
NOTICE
The ISD 510 servo drives cannot be used in servo
systems from other manufacturers without changing the
cabling infrastructure. Contact Danfoss for further
information.
Drives from other manufacturers cannot be used in the
ISD 510 servo system when using Danfoss hybrid cables.
1.5.1 Areas of Application
Potential areas of application are:
•
Food and beverage machines
•
Packaging machines
•
Pharmaceutical machines
•
Applications running with a group of decentral
servo drives.
1.6 Software
Updates to the firmware, ISD Toolbox software, and PLC
libraries may be available. When updates are available,
they can be downloaded from the
danfoss.com website.
The ISD Toolbox software or the PLC libraries can be used
to install the firmware on the servo drives or on the SAB.
1.7 Terminology
ISD Integrated servo drive
ISD 510 Servo
Drive Decentral servo drive
VLT
®
Servo Access
Box (SAB)
Unit that generates the DC-link voltage and
passes the U
AUX
, Real-Time Ethernet, and STO
signals to the ISD 510 servo drives via a
hybrid cable.
PLC External device for controlling the ISD 510
servo system.
Loop cable Hybrid cable for connecting drives in daisy-
chain format.
Feed-in cable Hybrid cable for connection from the SAB to
the 1st servo drive.
Table 1.4 Terminology
An explanation of all terminology and abbreviations can be
found in
chapter 12.1 Glossary .
Introduction
VLT
®
Integrated Servo Drive ISD
®
510 System
8 Danfoss A/S © 12/2015 All rights reserved. MG75K102
1 1