Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 75 / 122

13-51 SL Controller Event
Array [20]
Option: Function:
[74] SL Time-out 7
[83] Broken Belt
13-52 SL Controller Action
Array [20]
Option: Function:
Select the action corresponding to the
SLC event. Actions are executed when
the corresponding event (defined in
13-51 SL Controller Event ) is evaluated as
true. The following actions are available
for selection:
[0] Disabled
[1] No action
[2] Select set-up 1 Changes the active set-up ( 0-10 Active
Set-up ) to ‘1’.
[3] Select set-up 2 Changes the active set-up ( 0-10 Active
Set-up ) to ‘2’.
[10] Select preset ref
0
Selects preset reference 0.
[11] Select preset ref
1
Selects preset reference 1.
[12] Select preset ref
2
Selects preset reference 2.
[13] Select preset ref
3
Selects preset reference 3.
[14] Select preset ref
4
Selects preset reference 4.
[15] Select preset ref
5
Selects preset reference 5.
[16] Select preset ref
6
Selects preset reference 6.
[17] Select preset ref
7
Selects preset reference 7. If the active
preset reference is changed, it will
merge with other preset reference
commands coming from either the
digital inputs or via a serial communi-
cation bus.
[18] Select ramp 1 Selects ramp 1
[19] Select ramp 2 Selects ramp 2
[22] Run Issues a start command to the
adjustable frequency drive.
[23] Run reverse Issues a start reverse command to the
adjustable frequency drive.
[24] Stop Issues a stop command to the
adjustable frequency drive.
13-52 SL Controller Action
Array [20]
Option: Function:
[25] Qstop Issues a quick stop command to the
adjustable frequency drive.
[26] DC Brake Issues a DC stop command to the
adjustable frequency drive.
[27] Coast The adjustable frequency drive coasts
immediately. All stop commands
including the coast command stop the
SLC.
[28] Freeze output Freezes the output frequency of the
adjustable frequency drive.
[29] Start timer 0 Starts timer 0, see 13-20 SL Controller
Timer for further description.
[30] Start timer 1 Starts timer 1, see 13-20 SL Controller
Timer for further description.
[31] Start timer 2 Starts timer 2, see 13-20 SL Controller
Timer for further description.
[32] Set digital out A
low
Any output with ‘digital output 1’
selected is low (off).
[33] Set digital out B
low
Any output with ‘digital output 2’
selected is low (off).
[34] Set digital out C
low
Any output with ‘digital output 3’
selected is low (off).
[35] Set digital out D
low
Any output with ‘digital output 4’
selected is low (off).
[38] Set digital out A
high
Any output with ‘digital output 1’
selected is high (closed).
[39] Set digital out B
high
Any output with ‘digital output 2’
selected is high (closed).
[40] Set digital out C
high
Any output with ‘digital output 3’
selected is high (closed).
[41] Set digital out D
high
Any output with ‘digital output 4’
selected is high (closed).
[60] Reset Counter A Resets Counter A to zero.
[61] Reset Counter B Resets Counter B to zero.
[70] Start Timer 3 Starts timer 3, see 13-20 SL Controller
Timer for further description.
[71] Start Timer 4 Starts timer 4, see 13-20 SL Controller
Timer for further description.
[72] Start Timer 5 Starts timer 5, see 13-20 SL Controller
Timer for further description.
[73] Start Timer 6 Starts timer 6, see 13-20 SL Controller
Timer for further description.
Parameters
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark 3-47
3 3