Danfoss VLT HVAC Drive FC 100 Series, Руководство по программированию, Страница: 103 / 122

5.1.3 1-** Load and Motor
Par.
No. # Parameter description Default value 2-set-up Change
during
operation
Conver-
sion index
Type
1-0* General Settings
1-00
Configuration Mode [0] Open Loop All set-ups TRUE - Uint8
1-01 Motor Control Principle [1] VVC+ All set-ups FALSE - Uint8
1-03 Torque Characteristics [1] Variable Torque All set-ups FALSE - Uint8
1-06 Clockwise Direction [0] Normal 1 set-up FALSE - Uint8
1-1* Motor Selection
1-10
Motor Construction [0] Asynchron All set-ups FALSE - Uint8
1-14 Damping Gain 120 % All set-ups TRUE 0 Int16
1-15 Low Speed Filter Time Const ExpressionLimit All set-ups TRUE -2 Uint16
1-16 High Speed Filter Time Const ExpressionLimit All set-ups TRUE -2 Uint16
1-17 Voltage filter time const ExpressionLimit All set-ups TRUE -3 Uint16
1-2* Motor Data
1-20
Motor Power ExpressionLimit All set-ups FALSE - Uint8
1-22 Motor Voltage ExpressionLimit All set-ups FALSE 0 Uint16
1-23 Motor Frequency ExpressionLimit All set-ups FALSE 0 Uint16
1-24 Motor Current ExpressionLimit All set-ups FALSE -2 Uint32
1-25 Motor Nominal Speed ExpressionLimit All set-ups FALSE 67 Uint16
1-26 Motor Cont. Rated Torque ExpressionLimit All set-ups FALSE -1 Uint32
1-29 Automatic Motor Adaption (AMA) [0] Off 1 set-up FALSE - Uint8
1-3* Adv. Motor Data
1-30
Stator Resistance (Rs) ExpressionLimit All set-ups FALSE -3 Uint32
1-33 Stator Leakage Reactance (X1) ExpressionLimit All set-ups FALSE -3 Uint32
1-35 Main Reactance (Xh) ExpressionLimit All set-ups FALSE -2 Uint32
1-37 d-axis Inductance (Ld) ExpressionLimit All set-ups FALSE -3 Int32
1-39 Motor Poles 4 N/A All set-ups FALSE 0 Uint8
1-40 Back EMF at 1000 RPM ExpressionLimit All set-ups FALSE 0 Uint16
1-4* Adv. Motor Data II
1-42
Motor Cable Length 50 m All set-ups FALSE 0 Uint8
1-43 Motor Cable Length Feet 164 ft All set-ups FALSE 0 Uint16
1-5* Load Indep. Setting
1-50
Motor Magnetisation at Zero Speed 100 % All set-ups TRUE 0 Uint16
1-52 Min Speed Normal Magnetising [Hz] 0 Hz All set-ups TRUE -1 Uint16
1-55 U/f Characteristic - U ExpressionLimit All set-ups FALSE -1 Uint16
1-56 U/f Characteristic - F ExpressionLimit All set-ups FALSE -1 Uint16
1-6* Load Depen. Setting
1-60
Low Speed Load Compensation 100 % All set-ups TRUE 0 Uint16
1-61 High Speed Load Compensation 100 % All set-ups TRUE 0 Uint16
1-62 Slip Compensation 0 % All set-ups TRUE 0 Int16
1-63 Slip Compensation Time Constant 0.1 s All set-ups TRUE -2 Uint16
1-64 Resonance Dampening 100 % All set-ups TRUE 0 Uint16
1-65 Resonance Dampening Time Constant 0.005 s All set-ups TRUE -3 Uint16
1-66 Min. Current at Low Speed 50 % All set-ups TRUE 0 Uint32
1-7* Start Adjustments
1-71
Start Delay 0 s All set-ups TRUE -1 Uint8
1-72 Start Function [2] Coast/delay time All set-ups TRUE - Uint8
1-73 Flying Start [0] Disabled All set-ups FALSE - Uint8
Parameter Lists
VLT
®
HVAC Basic Drive Programming Guide
MG18B222 - VLT
®
is a registered Danfoss trademark 5-3
5 5