[83]
SL Digital Output D
See par. LC-52 Logic
Controller Action
. The input will go high whenever the Smart Logic Action [41]
Set dig. out. A
high is executed. The input will go low whenever the Smart Logic Action [35]
Set
dig. out. A low
is executed.
[84]
SL Digital Output E
See par. LC-52 Logic
Controller Action
. The input will go high whenever the Smart Logic Action [42]
Set dig. out. A high
is executed. The input will go low whenever the Smart Logic Action [36]
Set
dig. out. A low
is executed.
[85]
SL Digital Output F
See par. LC-52 Logic
Controller Action
. The input will go high whenever the Smart Logic Action [43]
Set dig. out. A high
is executed. The input will go low whenever the Smart Logic Action [37]
Set
dig. out. A low
is executed.
[120]
Local reference active
Output is high when par. F-02 Operation
Method
= [2] Local or when par. F-02 Operation
Method
= [0]
Linked to hand auto
at the same time as the is in Hand on mode.
[121]
Remote reference active
Output is high when par. F-02 Operation
Method
= Remote
[1] or
Linked to hand/auto
[0] while
the is in [Auto on] mode.
[122]
No alarm
Output is high when no alarm is present.
[123]
Start command active
Output is high when there is an active Start command (i.e. via digital input bus connection or [Hand
on] or [Auto on]), and no Stop or Start command is active.
[124]
Running reverse
Output is high when the frequency converter is running counter clockwise (the logical product of
the status bits ‘running’ AND ‘reverse’).
[125]
Drive in hand mode
Output is high when the frequency converter is in Hand on mode (as indicated by the LED light
above [Hand on]).
[126]
Drive in auto mode
Output is high when the frequency converter is in Hand on mode (as indicated by the LED light
above [Auto on]).
E-24 Function Relay
Array [9]
(Relay 1 [0], Relay 2 [1], Relay 3 [2], Relay 4 [3], Relay 5 [4], Relay 6 [5], Relay 6 [5], Relay 7 [6], Relay 8 [7], Relay 9 [8])
Option:
Function:
[0] *
No operation
[1]
Control ready
[2]
Drive ready
[3]
Drive rdy/rem ctrl
[4]
Enable / no warning
[5]
Drive running
[6]
Running / no warning
[7]
Run in range/no warn
[8]
Run on ref/no warn
[9]
Alarm
[10]
Alarm or warning
[11]
At torque limit
[12]
Out of current range
[13]
Below current, low
[14]
Above current, high
[15]
Out of speed range
[16]
Below speed, low
[17]
Above speed, high
[18]
Out of feedb. range
[19]
Below feedback, low
[20]
Above feedback, high
[21]
Thermal warning
[22]
Ready,no thermal W
FC 300 Extended Relay Card Operating In-
structions
5. Parameter Set-up
MI.33.G2.02 - VLT
®
is a registered Danfoss trademark
17
5