© Danfoss 05-2011
AK-EM 100 Installation Guide
13
RC8BX402
2. Network Communications
The additional tasks listed in the Commissioners Toolbox act as a guide for the fine tuning of the system,
and are listed in the Additional Tasks section. They are as follows:
a) Asset Configuration
- Configures the settings for the controller to each asset
b) Upload DES file
- upload the DES file for controller changes
c) Save Configuration
- Saves the current configuration/set-up
d) Print Asset Details
- Print an Asset’s details
e
)
Export All Asset Details
- Export all asset details to an XML file
f) User Administration
- Create users and groups
g) Mimic Set up
- Create the store UI
h)
Restore Configuration
- Restore the configuration of the AK-EM 100 to a back up configuration
i) Modem Settings
- set the modem address and user name for remote access
The Asset Configuration screen can be accessed by either clicking on the link in the Additional
Tasks section or by clicking on an individual asset name from the network list table in the Network
Communication section.
The Asset Configuration page consists of a table which lists all of the parameters within the currently
selected asset. The parameters are all grouped under their respective headings. The parameter names all
come from the Log Files of each asset once the communication process has been initialised.
From these pages, you can configure each asset. The header names can be edited by hovering over the
text and individual parameter names and can be edited as well (changes will also be exported). All settings
can be copied to other similar assets.
2.1.1 Viewing the Assets
1. To view a different asset, select one from the drop down menu at the top of the page. From there, you
can run through the other assets by using scroll buttons.
2.1 Asset Configuration
