![background image](http://html1.mh-extra.com/html/dane-technologies/wm2000/wm2000_owners-manual_3373015053.webp)
Dane Technologies, Inc.
WheelChair Mover
Owners Manual
53
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
Gas Bottle Holder Option (P/N 100-226)
The Gas Bottle Holder is designed to hold E-size gas cylinders. D-size can also be
carried, but the holding clamp will not engage at the neck below the valve and so the D-
size cylinder will tend to rock back and forth. There is no special maintenance
necessary for the Gas Bottle Holder.
Installation:
The gas bottle holder is typically installed on the left side of the WheelChair Mover
before shipment. If purchased separately:
1. The gas bottle holder is usually installed on left side of the WheelChair Mover, but
may be installed on the right.
a. Using a #27 Torx wrench, loosely install the gas bottle holder on the
WheelChair Mover with top bolt.
b. Align the bottom slot that is closest to the front of the WheelChair Mover with
the mounting hole and install the second bolt
c. Tighten both bolts.
Using the Gas Bottle Holder:
Each day before use the Gas Bottle Holder should be inspected for:
1. Bent or damaged rings
2. Broken or bent retaining screw
3. Loose or missing mounting bolts
1a
1b
Bolt goes through
slot closest to front