Dane Technologies, Inc.
WheelChair Mover
Owners Manual
38
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
Remove the shaft nut and washer at the center of the drive wheel and remove the
wheel or wheel/hub assembly.
After installing the new wheel, replace the washer and nut at the center of the drive
wheel.
Raise the machine upright, tighten the shaft nut to 50 ft-lbs and reinstall the covers.
Insert the red service maintenance key and turn it. Turn on the machine and test it
for correct operation.
4) The rear caster wheels should last for years and rarely need attention. If they should
need cleaning, follow this procedure:
Turn off the red service maintenance switch and remove the key.
Jack up the machine so that one rear wheel is about 1/2 inch off the ground.
Remove nut,
washer and
wheel