![background image](http://html1.mh-extra.com/html/dane-technologies/wm2000/wm2000_owners-manual_3373015036.webp)
Dane Technologies, Inc.
WheelChair Mover
Owners Manual
36
7105 Northland Terrace, Minneapolis, MN 55428 / 888-544-7779 / 763-544-7779 / Fax 763-544-4234
Maintenance Notes
WARNING!
If the WheelChair Mover malfunctions, turn it off
and tag the machine "DO NOT USE". Remove the
service maintenance key. Immediately report the
malfunction to the appropriate supervisor or call
Dane Technologies at our toll-free service line:
888-544-7779. Do not use the WheelChair Mover
until a qualified facility maintenance technician, or
a Dane Technologies authorized service
technician has repaired it.
WARNING!
Do not expose your WheelChair Mover to
excessive moisture such as spraying it with a
hose. Excessive moisture around the controller or
electrical connections may cause contamination of
electrical circuitry, damage and malfunction, as
well as personal injury.
Notes:
1) Keep the WheelChair Mover free from the accumulation of grease, dirt, and other
materials. Every six months, inspect the electrical connections on the WheelChair
Mover for frayed or deteriorated insulation.
2) The WheelChair Mover must be plugged in to recharge the batteries. Use the
attached cord with a single grounded receptacle at the end. Plug the cord into a
wall outlet socket and the charger into the WheelChair Mover. Since the charger is
regulated to prevent battery overcharge, it is not necessary to monitor the
recharging period. When the batteries are completely discharged, as indicated at
the lowest level on the battery meter, complete recharge will take approximately 8
hours.
3) The tire for driving the WheelChair Mover is part of the drive axle assembly and is
filled with foam and will never go flat. If a tire should become worn out or damaged,
it is replaced as follows: