Xtium2-CXP PX8 User's Manual
Appendix B: Troubleshooting Problems
•
123
To start the Teledyne DALSA Device Manager program
•
On the Start menu, select Teledyne DALSA Xtium2-CXP PX8 > Device Manager.
If the Device Manager Program does not run, it will exit with a board was not found message.
Possible reasons for an error are:
•
Board is not in the computer.
•
Board driver did not start or was terminated.
•
PCI conflict after some other device was installed.
Information Window
The following figure shows the Device Information screen. Select a board component to display its
information in the right hand window, as described below.
Figure 57: Board Firmware Version
•
Select Information to display identification and information stored in the Xtium2-CXP PX8
firmware.
•
Select Firmware to display version information for the firmware components.
•
Select one of the firmware components to load custom firmware when supplied by Teledyne
DALSA engineering for a future feature.
•
Select File > Save Device Info to save all information to a text file. Email this file when
requested by Technical Support.
