Xtium2-CXP PX8 User's Manual
Appendix A: Silent Installation
•
111
Running a Silent Mode Installation
A device driver silent installation, whether done alone or within a larger software installation
requires the device driver executable and the generated response file.
Execute the device driver installer with the following command line:
Xtium2-CXP_PX8_1.00.00.0000 -s -f1".\setup.iss"
Where the
–s
switch specifies the silent mode and the
–f1
switch specifies the location of the
response file. In this example, the switch
–f1".\setup.iss"
specifies that the setup.iss file be in
the same folder as the device driver installer.
On Windows 10, the Windows Security dialog box will appear unless one has already notified
Windows to Always trust software from “Teledyne DALSA Inc.” during a previous installation of
a driver.
Silent Mode Uninstall
A response file must be prepared prior to silently removing the device driver.
Creating a Response File
The installer response file is created by performing a device driver un-installation with a
-r
command line switch. The response file is automatically named
setup.iss
which is saved in the
\windows folder. If a specific directory is desired, the
–f1
switch is used.
For instance, to save a response file in the same directory as the installation executable of the
Xtium2-CXP PX8, the command line would be:
Xtium2-CXP_PX8_1.00.00.0000 –r -f1".\setup_uninstall.iss"
Running a Silent Mode Uninstall
To uninstall silently, the device driver requires the device driver executable and the generated
response file.
Execute the device driver installer with the following command line:
Xtium2-CXP_PX8_1.00.00.0000 -s -f1".\setup_uninstall.iss"
Where the
–s
switch specifies the silent mode and the
–f1
switch specifies the location of the
response file. In this example, the switch
–f1".\setup_uninstall.iss"
specifies that the
setup_uninstall.iss file be in the same folder as the device driver installer.
