Optional LED Ring Light
The BOA2-XA2/XA3 models support the option of adding a ring light inside the lens
cover. The light mounts to the camera through 4 HEX M3 threaded stand-offs. Two of
the stand-offs are conductive to supply power to the light.
Note: The ring light opening is
not large enough to support the 1” lens needed for the BOA2-XA5 model.
High power white LED
ring light attached to
BOA2-XA2/XA3 models
Assembly Instructions:
1.
Remove the nylon screws in the camera front plate where the light ring attaches
2.
Install the two nylon washers from the light ring kit into the two larger mounting
holes on the inside front of the camera body
3.
Screw the 4 HEX light support posts into the inside threads of the light mounting
holes, making sure not to knock out the nylon washers from step 1
4.
Align the ring light over the four support posts and secure using the 4 screws in the
light ring kit.
Note: The light mounting holes are staggered to avoid incorrect
assembly.
5.
With the light installed, carefully adjust the focus on the lens before installing the
protective lens cover
Threaded holes (4) for
light ring supports. Two
on each side
Version 4.3; 2017-11-20
13
BOA2-XA Installation
