The BOA web server is a portal through which the BOA2 vision system can be set up
and configured for an application. The web server is accessed from a host (client) PC
using Microsoft Internet Explorer version 6 or higher as follows:
The BOA Web Server
1.
Open Internet Explorer on the PC connected to the camera
2.
Enter the URL address of the camera: 192.168.0.100 and click “go”
3.
The camera web server interface will be displayed in the browser as follows:
4.
The web server provides a quick snapshot of the state of the camera and provides
controls for language selection, IP address setup, firmware upgrading and image
backup or restore. The web server is the portal into the inspect Express application
and can be set up to prevent unauthorized access.
5.
Click on the “iNspect Express” hot link to launch the application. The camera will
automatically install some software components on the client when it connects for
the first time. These components set up the remote access to the device.
6.
Using the iNspect Express software (refer to the iNspect Express Users
Manual), set up an application and store the solution on the camera. Exit the
application and return to the web server interface.
7.
The “History Log” hot link offers a quick and convenient way to view and store
inspection results to an Excel spreadsheet on the client. This feature is also
available from within the iNspect Express application using the scripting tool.
Version 4.3; 2017-11-20
20
BOA2-XA Installation
