The BOA2 vision system offers flexible cabling to suit a number of application
configurations:
Cable Configurations
Panel Link Module (A-BVS-PL-101)
1.
For single cable applications that do not require a runtime Ethernet connection, the
I/O-PWR cable provides limited communications and power between the camera
and the control environment.
Note: Ethernet is still required for setup.
2.
For typical applications, both the Ethernet and I/O-PWR cables are connected to
provide flexibility between the camera and the control environment.
3.
In all configurations, the Lamp cable can be connected between the camera and a
compatible LED light source. The BOA2 vision system supplies power and strobe
control to the external light. Power is routed from camera power input to the lamp.
The PL-101 module is an optional module that provides a safe and convenient way to
interface with BOA2. It provides an isolation barrier between the factory and the camera
(differential isolation) and allows convenient panel wiring. The PL-101 also provides a
manual trigger button and status lights for application debug.
A-BVS-PL-101
BEWARE: Connecting a voltage on pin 1 of the lamp connector that is lower than
the input power voltage to BOA2 could result in damage to the camera!!
Version 4.3; 2017-11-20
10
BOA2-XA Installation
