Care should always be exercised when handling and operating your BOA2 Vision
System. Even though the system is encased within a rugged, industrial enclosure,
incorrect use or handling can result in damage to your investment. To prevent this, we
recommend you avoid the following:
Handling Precautions
•
Hot-plugging cables and devices. Be sure to shut the system down and remove
power before connecting or disconnecting anything to it.
•
Free-standing operation. It is advisable to mount the system properly to prevent it
from falling accidentally. Mounting holes are provided on each side of the system.
•
Operating the system in an environment outside of it’s recommended operating
conditions.
Electro Static Discharge
Avoid the damage that ESD can cause. Never expose the internal electronics to a
potentially hazardous environment by opening the enclosure. Doing so may cause
serious damage.
User Service Warning
This product has no field-replaceable components. Tampering with the unit will void the
product warranty.
Warranty
Teledyne DALSA warrants the BOA2 Vision System against defects in materials and
workmanship for a period of twenty four (24) months from the date of delivery. Teledyne
DALSA and its representatives expressly disclaim any and all other warranties.
Your sole remedy shall be repair or replacement of the BOA2 Vision System product and
associated optional components, provided that the defective product is returned within
the warranty period.
If you need to return the BOA2 Vision System, you must contact the Teledyne DALSA
representative who sold you the product. Do not return your product to Teledyne DALSA
without prior authorization.
Teledyne DALSA assumes no liability for damages resulting from the use of this manual.
Version 4.3; 2017-11-20
4
BOA2-XA Installation
