| 111
Alarm
Cause
Effect
Data
loss
This alarm is triggered when there
is a data loss in the EEPRO, that is,
when all the settings defined during
installation are lost and the machine
returns to the factory defaults
Tap DEL on the display to cancel
the alarm and contact an authorized
technical service provider
Clock
failure
This alarm is triggered when the
clock's internal module does not
work; as a result the timer, if active,
is automatically deactivated
Tap DEL on the display to cancel
the alarm.
If the alarm repeats, contact an
authorized technical service provider
CPU
serial
port
failure
This alarm is triggered when the serial
transmission between the electronic
board of the front panel and the power
board are no longer able to communicate
with each other
Equipment completely blocked.
If the problem persists after an attempt
to reset the equipment via the general
switch, contact an authorized technical
service provider
24V
alarm
This alarm is triggered when the
required supply of 24 volt voltage
necessary for the operation of all
internal devices is not present
Equipment completely blocked.
If the problem persists after an attempt
to reset the equipment by means of the
general switch, contact an authorized
technical service provider
