Daktronics ALL SPORT 5500 SERIES Скачать руководство пользователя страница 11

Страница: 11 / 108

Basic Operation

Sport Inserts

Sport inserts allow one console to control multiple sports. Select the proper insert from the

chart below and slide it into the insert opening on the left side of the console until it stops.

To remove a sport insert, pull on the tab that extends from the left side of the console.
If an insert is lost or damaged, a printed copy of the insert drawing from

Appendix B

may

be used until a replacement can be ordered. Print this page (if viewing digital copy) and

write the code number in the following table for all applicable sports.
If the code number for a scoreboard is unknown, refer to

Appendix C

. If the model

number of a scoreboard is unknown, refer to the documentation provided with the

scoreboard.

Sport

Insert Number

Number Code

Basketball

LL-2433

Segment Timer

LL-2475

Not applicable

Volleyball

LL-2434

Wrestling

LL-2435

A sport insert identifies the keys required for normal operation of a specific sport. In most

cases, pressing a key immediately changes the scoreboard. Keys that require entry

of additional information are marked by a dot. This additional information is usually a

number followed by the

<ENTER>

key.

Keys with arrows activate an indicator (possession, bonus, etc.) on the scoreboard. The

direction of the arrow selects the appropriate team (home or guest).
Some keys are labeled

, or

. By pressing one of these keys once, the

corresponding field on the scoreboard (such as score or period) “increments”, or

increases, by the amount printed on the key. A key with

-1

“decrements”, or decreases,

by one.
On most inserts, certain keys have been grouped together under the heading

Home

Guest

. These keys are

team

keys and work the same for both teams. They affect the

statistics only for that one team. Keys not under one of these headings are

game

keys.

They are general keys for the progress of the game (such as period or quarter). Other

keys may be grouped in a similar way to emphasize that they work together.

Содержание ALL SPORT 5500 SERIES













































































































Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы:

Похожие инструкции для ALL SPORT 5500 SERIES

Бренды по названию

Популярные бренды

Daktronics ALL SPORT 5500 SERIES, Руководство по эксплуатации

Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы:

Похожие инструкции для ALL SPORT 5500 SERIES

Бренды по названию

Популярные бренды