Daktronics ALL SPORT 5500 SERIES Скачать руководство пользователя страница 27

Страница: 27 / 108

Segment Timer Operation

Display

Action

MENU- MAIN ENTER
DISPLAY MENU?

MENU-DISPLAY RUN
SEGMENT TIMER?

EXIT GAME
ARE YOU SURE?

After the main clock has been stopped, press the

<MENU>

key and press the down or up arrows until the LCD at left is

displayed. Press

<YES>

to enter the display menu.

Press

<YES>

to exit the sport code and run the segment timer

program. The console will prompt to press

<YES>

a second time

to avoid accidental exit from the sport program.

Refer to

Segment Timer Keys (p� 21)

for general segment timer

operation instructions.

Accessing 2-Digit or 6-Digit Display Segment Timer

This code is only used for the two-digit or six-digit displays designed exclusively for

segment timing. Enter code

100

after turning on the console to access the exclusive

segment timer program. For scoreboards, enter the correct scoreboard code and use

<MENU>

to access the segment timer function.

Segment Timer Keys

Segment Number & Time

The

<SEG� NO� • TIME •>

key is used to edit the time of each segment. Select the

segment to be edited, and enter the desired time as described below.

Display

Action

SEGMENT: NN *
TIME EDIT

NN = current setting

SEGMENT: NN
TIME EDIT MM:SS*

NN = current setting

MM:SS = minutes, seconds

Press

<SEG� NO� • TIME •>

to set individual segment times.

Enter the segment to be edited using the keypad, and then

press

<ENTER>

Enter the time for the segment with the keypad. Press

<ENTER>

accept the time and move to the next segment time.

Press

<ENTER>

again to exit the function.

Press the up or down arrow keys to move to the previous or next

segment.

First Segment

This key sets the first segment in a range of segments to run when

<START>

is pressed.

Display

Action

FIRST SEGMENT
NN*

NN = current setting

Press

<FIRST SEGMENT •>

and enter the segment to be set as

the first segment. Press

<ENTER>

to accept the time and exit the

function.

The console will be reset to the segment selected here when the

<RESET TO FIRST SEG>

key is pressed.

Содержание ALL SPORT 5500 SERIES













































































































Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы:

Daktronics ALL SPORT 5500 SERIES, Руководство по эксплуатации, Страница: 27 / 108

Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы: