Daktronics ALL SPORT 5500 SERIES Скачать руководство пользователя страница 101

Страница: 101 / 108

Scoreboard Driver Bootload

Update Procedure

ED-18728
Rev 3
8 February 2018

201 Daktronics Drive Brookings, SD 57006

www.daktronics.com/support

800.325.8766

Page 1 of 3

Some scoreboard drivers feature a “bootloader” that allows firmware updates to be performed in

the field using a computer and an All Sport 5000 or an All Sport 5500 (ColorSmart) control console. The

console acts as a signal converter between the computer and the scoreboard network.

Requirements

Software Versions

•

The All Sport 5000 must have software version 4.1.5 or later.

•

The All Sport 5500 must have software version 1.0.5 or later.

•

The 16 column MultiCast driver (0P-1388-0100) must have software version 1.3 or later.

•

The Gyrus driver (0A-1782-0100) must have software version 1.3 or later. Also note:

•

Gyrus driver address must be non-zero.

•

Gyrus driver will not bootload if running Power-On Diagnostics (FF).

•

Gyrus drivers must be running from Multi-Drop protocol and will not bootload while running in any

of the other following protocols:

– Multi-Line

– Colorado Timing Systems

– Omega

Equipment

•

Computer with internet access and a 9-pin serial port [or USB-to-Serial adaptor (part # A-2221)]

•

9-pin to 9-pin serial cable (part # W-1267) or 9-pin to 25-pin serial cable (part # W-1249)

Instructions

Make sure that the All Sport console has a version of firmware that supports bootloading (see

Requirements

above). If it does not, contact customer service to request an All Sport PROM update.

Make sure the scoreboard driver has a version of firmware that supports bootloading by cycling the

scoreboard power and observing the power up sequence. An “rx.x” message will be displayed,

where “x.x” is the version number. If the version number is under 1.3, the drivers will have to be

updated with a programming board or exchanged for newer versions.

Download the DakLoader program and the Field Update file:

On a computer with internet access, open a web browser and go to:

http://dakfiles.daktronics.com/downloads/Sports_Products/Bootloader/

Click on the “DakLoader2.exe” file, and

Save

it to the Desktop.

Click on the specific “Driver Update Files” directory, either “MultiCast” or “Gyrus”.

Click on the “16 col driver” directory.

Click on the compressed “.zip” file, and

Save

it to the Desktop as well.

–

MultiCast Drivers:

“ED-16327_Mcast16.zip”

–

Gyrus Drivers:

“DD-2929930_Gyrus_vX_Y.zip” (X_Y = latest version number)

Unzip the downloaded file to obtain the “.fud” (

ield

ate) file.

NOTE FOR GYRUS DRIVERS:

The proper Field Update File to unzip depends on the firmware of the All Sport 5000 console. Power

on the console, and identify the firmware version during boot-up.

- Version 4.1.5:

Unzip the FUD file in the “AllSport_v4_1_5_compatible” folder.

- Version 4.1.6+:

Unzip the FUD file in the “AllSport_v4_1_6_plus_compatible” folder.

Содержание ALL SPORT 5500 SERIES













































































































Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы:

Похожие инструкции для ALL SPORT 5500 SERIES

Бренды по названию

Популярные бренды

Daktronics ALL SPORT 5500 SERIES, Руководство по эксплуатации

Результаты поиска

Содержание ALL SPORT 5500 SERIES

Отзывы:

Похожие инструкции для ALL SPORT 5500 SERIES

Бренды по названию

Популярные бренды