DAKOTA ULTRASONICS MiniMax v2.0 Скачать руководство пользователя страница 68

Страница: 68 / 197

Dakota Ultrasonics

obtaining the information needed to use the standard bolt for a probe zero calibration
bar.

Setting up a Bolt Standard – For the First Time

1) With the menu items already active, press the

key multiple times to tab

right and the

key multiple times to tab left until the

CAL

menu is

highlighted and displaying the submenu items.

2) Press the

and

arrow keys multiple times to scroll through the sub

menu items until

ZERO MODE

is highlighted.

3) Press the

and

arrow keys multiple times to scroll the zero mode

options until the

FIXED

option is displayed.

Note:

Each time the arrow keys are pressed a confirmation screen will appear

to warn the user that the zero mode is being changed. Press the

key to

advance to the next mode option.

Note:

The fixed option sets the delay factor to zero. In other words, disables

the zero feature altogether.

4) Press the

key multiple times to tab right and the

key multiple times

to tab left until the

MATL

menu is highlighted and displaying the submenu

items.

Содержание MiniMax v2.0






































































































































































































Результаты поиска

Содержание MiniMax v2.0

Отзывы:

Бренды по названию

Популярные бренды

DAKOTA ULTRASONICS MiniMax v2.0, Руководство по эксплуатации

Результаты поиска

Содержание MiniMax v2.0

Отзывы:

Бренды по названию

Популярные бренды