manualshive.com logo in svg

DAKOTA ULTRASONICS MiniMax v2.0, Руководство по эксплуатации

Поделиться
Скачать
DAKOTA ULTRASONICS MiniMax v2.0 Скачать руководство пользователя страница 190

Dakota Ultrasonics 

184 

 

6)  Press the 

 key to delete the 

Setup File

.

 

7)  Finally, press the 

 key to return to the measurement screen.

 

 

15.5 Using the Default Setup 

The default setup feature was added to the 

MiniMax

 to use, as a last resort, if there 

are no setups stored in the gauge –factory or otherwise.  The only time this might 
possibly occur is if the setup file in the 

MiniMax

 was somehow corrupted, and the 

user does not have access to a computer to re-load the factory setups back into the 

MiniMax

.  This gives the user the ability to load and modify a basic setup as follows: 

 

Using the Default Setup 

 

1)  Press the 

 key once to activate the menu items tab.  Press the 

 key 

multiple times to tab right and the 

 key multiple times to tab left until the 

SETUP 

menu is highlighted and displaying the submenu items. 

Содержание MiniMax v2.0






































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды