MiniMax
Bolt Tension Monitor
11
elongation mode, the measurement consists of a difference equation only
(Loaded Length – Unloaded Length =
Length). Therefore, it doesn’t matter if
the ultrasonic length is different from the actual physical length, because the
Length will be the same. Example: 2.0080” physical loaded length – 2.0000”
physical unloaded length = 0.0080”
Length which is equivalent to 2.1080”
ultrasonic loaded length – 2.1000” ultrasonic unloaded length = 0.0080”
Length.
1) Press the
and
arrow keys multiple times to scroll through the sub
menu items until
TYPE
is highlighted.
2) Press the
key to display the list material types.
3) Press the
and
arrow keys multiple times to scroll through the
material list until the appropriate type is highlighted.
4) Press the
key to display the confirmation screen.
5) Press the
key to select the type and return to the menu screen, or
to cancel selecting the material type.
3.4 Creating a New Group to Store Measurements
Now that the
MiniMax
is all setup, this section will explain how to get started
measuring unloaded initial lengths. In order to do this, we need to create a group
that contains bolts. A group can have up to 250 bolts, each bolt containing 1
reference length (L-REF), and up to 51 elongations. Keep in mind that the
MiniMax
uses a group to store measurements and all gauge settings at the time of
measurement.
Creating a Group Name
Содержание MiniMax v2.0
Страница 2: ......
Страница 49: ...MiniMax Bolt Tension Monitor 43 Figure 6 Reflection in a bending bolt...
Страница 192: ...Dakota Ultrasonics 186 4 Once the desired language is displayed press the key to return to the measure screen...
Страница 196: ......
