Daiwha DI-6000, Руководство пользователя

Страница: 48 / 78

Custom Settings
42
3
AC/DC Remove
Alarm
Used to set the alarm to On or Off when the AC/DC po
wer cable is connected or disconnected.
4 Alarm Volume
Used to set the alarm and sound volume.
Setting range is 1 ~ 10 steps. (50dB ~ 67dB)
5 Key Volume Used to set the button sound volume.
6.4.2 Sensor
1 Up Occlusion level
Used to set the Up Stream Occlusion sensitivity level to
1 through 10.
Operation of ‘Up Occlusion’ may vary depending on the
quality of the ‘I.V Set’.
2
Down Occlusion le
vel
Used to set the Down Stream Occlusion sensitivity level
to 1 through 10.
3 Air Set
Used to set the air bubble size.
Air Set Level Air Bubble Check
OFF No detection
Large 15 mm or above
Medium 10 mm or above
Small 5 mm or above
4 Drop Sensitivity
Used to set the drop sensor’s sensitivity.
▪ You can set the sensitivity to High (90 % - sensitive),
Middle (100 % - default), or Low (110 % - insensitive).
6.4.3 History
1 Alarm log
Displays the alarm logs.
 The list is sorted from the recently recorded items.
2 Event log
Displays the event logs.
 The list is sorted from the recently recorded items.
6.4.4 Etc
1 Nurse call
Used to set the Nurse Call mode to On or Off when an
alarm occurs.
 When the Nurse call is turned on, the pump will transmit
alarm signals to a nurse call system.
 The nurse call system should be connected to the Nurse
Call connector on the back of the pump to alert nurses.
2 Auto Save Used to set the Save function to On or Off