manualshive.com logo in svg

Daikin Super Multi Plus E-Series BPMKS967B2B, Руководство по обслуживанию

Поделиться
Скачать
Daikin Super Multi Plus E-Series BPMKS967B2B Скачать руководство пользователя страница 216

RA Indoor Unit

SiBE18-821_C

204

Operation Manual

3.2.4 Adjusting the Airflow Direction

FTXS20/25/35/42/50G2V1B

Adjusting the Airflow Direction

„

1. Press “SWING button      ”.

2.

„

3. Press “SWING button        ”.

4.

1, 2

3, 4

You can adjust the airflow direction to increase 
your comfort.

To adjust the horizontal 
blades (flaps)

•   “       ” is displayed on the LCD and the 

flaps will begin to swing.

When the flaps have reached 
the desired position, press 
“SWING button      ” once 
more.

To adjust the vertical 
blades (louvers)

When the louvers have reached the desired position, press the 
“SWING button         ” once more.

•   The flaps will stop moving.

•   “      ” disappears from the LCD.

•   The louvers will stop moving.

•   “      ”   ” disappears from the LCD.

•   “          ” is displayed on the LCD.

Содержание Super Multi Plus E-Series BPMKS967B2B













































































































































































































































































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды