manualshive.com logo in svg

Daikin SkyAir Super Inverter 70 D Series, Руководство по обслуживанию

Поделиться
Скачать
Daikin SkyAir Super Inverter 70 D Series Скачать руководство пользователя страница 60

SiE25-110

Method of Field Set (Reset after Maintenance Inspection/Repair)

Field Setting

51

After Setting

Stick the Unit No. label at decoration panel air discharge outlet as well as on the back of the 
wireless remote controller.

PRECAUTIONS
Set the Unit No. of the receiver and the wireless remote controller to be equal. If the setting 
differs, the signal from the remote controller cannot be transmitted.
1. Do not use any settings not listed in the table.
2. For group control with a wireless remote controller, initial settings for all the indoor units of 

the group are equal. (For group control, refer to the installation manual attached to the 
indoor unit for group control.)

Содержание SkyAir Super Inverter 70 D Series
































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды