Daikin SkyAir Super Inverter 70 D Series, Руководство по обслуживанию

Страница: 56 / 255

SiE25-110 Method of Field Set (Reset after Maintenance Inspection/Repair)
Field Setting 47
1.5.4 Ultra-Long-Life Filter Sign Setting
When a Ultra-long-life filter is installed, the filter sign timer setting must be changed.
Setting Table
1.5.5 No. of Connected Twin System Indoor Units
If using as twin system, switch the second code No. according to the number of units connected
as given in the table below. The second code No. is factory set to “01” (No. of connected units =
1).
Setting Table
Example
Note: 1. If set incorrectly, a connection mistake malfunction (remote controller display UA) will result.
(3 minutes after turning the power ON is required for detection.)
2. If different models are used in combination, designate the unit that is equipped with the most
functions as the main unit.
1.5.6 Setting of Air Flow Direction Adjustment Range
Make the following air flow direction setting according to the respective purpose.
Mode No. Setting Switch No. Setting Position No. Setting
10 (20) 1 01 Long-Life Filter
02 Ultra-Long-Life Filter (1)
03 —
Mode No. First Code No. Second Code No. Setting
11(21) 0 01 Pair (1)
02 Twin (2)
03 Triple (3)
(S2536)
Outdoor
unit
3
3
Outdoor
unit
3
3 3
Main
indoor unit Main
indoor unit
Sub
indoor
unit Sub
indoor
unit Sub
indoor
unit
"Twin"
setting
"Triple"
setting
Remote controller Remote controller
Mode No. First Code No. Second Code No. Setting
13 (23) 4 01 Upward (Draft prevention)
02 Standard
03 Downward (Ceiling soiling
prevention)