Daikin RXQ12AHR, Руководство по обслуживанию

Страница: 136 / 321

Field Settings for Outdoor Unit SiAF341904E
130 Part 5 Field Settings and Test Operation
2.2.1 DIP Switch Setting Mounting a Spare PCB
Caution:
 After replacement with spare PCB, be sure to make settings shown in the table below. The
procedure for making settings of spare PCB is different from that used for factory settings
described above. Be sure to refer to the table on the following page in order to make settings
of spare PCB after replacement.
 Enforce a re-initialization of communication: hold press button BS3 “RETURN” for minimum
5 seconds.
 After initialization, a test operation is required from outdoor unit (hold BS2 “SET” until
indication “t
01 ” appears).
(1) Microcomp u ter normal monitor
This monitor b links w hile in normal operation, and t u rns O N or OFF w hen an error occ u rs.
(2) 7 segment display
· Used to check the transmission.
· Used to display the transmission state
b et w een indoor and o u tdoor u nits.
· Used to display the contents of error.
· Used to display the contents of field setting.
(3) BS bu tton
Used to change mode.
(4) DIP s w itch
Used to make field settings.
(3) BS bu tton (BS1 ~ BS3) (2) Segment display (SEG1 ~ SEG3)
(4)
DIP s
w itch
(DS1-1 ~ 4)
(DS2-1 ~ 4)
(1)
Microcomp
u ter
normal monitor
(HAP)
Connection terminal
for transmission
u se
O N
OFF
1 2 3 4
DS1
O N
OFF 1 2 3 4
DS2
Initial position
of DIP s w itches
Position
Set s
w itch