3
x
Operation
Daikin RoCon HP
Daikin Control
008.1420844 – 05/2014
Operating instructions
7
Tab. 3-1 Explanation of display symbols
3.2.2 Operating elements
CAUTION!
Never operate the operating elements on the con-
troller with a hard, pointed object. This can cause
damage and can cause the control to malfunction.
If special key combinations or extended key pushes are required
for certain function, a separate note is made in each specific
section of this description.
Rotary switch
The rotary switch is used to gain rapid direct access (main
function level) to frequently required functions and setting possi-
bilities.
Independent of the setting of the rotary switch, the
Daikin Altherma EHS(X/H) operates in accordance with
the operating mode set in the switch position
"Oper-
ating Mode"
or which has been activated by a
special programme.
Action
Result
Rotating
Direct selection of the main function level allo-
cated to this switch position.
Tab. 3-2 Function of rotary switch
Rotary switch
The rotary switch can be used to navigate in the individual levels,
setting values can be selected, changed and these changes can
then be accepted by pressing briefly.
Action
Result
Rotating
To the right (+): Increased regulation
To the left (–): Reduced regulation
Tap sthing
Confirm, accept, selection and execute the
function.
Tab. 3-3 Functions of the rotary switch
2 / 3
Temporary timer programme "Away" active
(see section 3.4.7)
2 / 3
Temporary timer programme "Holiday"
active (see section 3.4.7)
2 / 3
Temporary timer programme "Vacation"
active (see section 3.4.7)
2 / 3
Screed Program active (see section 3.6.13)
5
Direct heating circuit
– Under normal conditions, the current
inflow temperature t
V, BH
is displayed.
– In the case of no demands from the
heat pump, the abbreviation "ES" is
displayed instead of the current inflow
temperature.
The control system has switched to
energy saving mode
(see section 3.4.2). Superfluous
electronic components are
switched off.
5
Mixer circuit
The current inflow temperature of the se-
lected heating circuit is displayed.
5
Room temperature sensor
The current room temperature is displayed.
6
Heating circuit status
– Heating circuit active (room heating
function)
– Heating circuit active (room cooling
function)
– Heating circuit not active (currently no
heat transfer in the heating circuit)
7
Outside temperature sensor
The current outside temperature is dis-
played.
8
Current operating mode (see section 3.4.2)
Standby active.
Reducing active.
Heating active.
Cooling active.
Summer active.
Automatic 1 active.
Automatic 2 active.
9
Domestic hot water generation active
Domestic hot water generation not active
10
Domestic hot water circuit status
The current storage tank temperature
t
DHW1
is displayed.
Item
fig. 3-2
Symbol
Explanation
