11
|
Configuration
Installer reference guide
247
ERRA08~12E + ELVH/23E
Daikin Altherma 3 R MT F
4P708474-1 – 2023.05
Overview field settings
Almost all settings can be done using the menu structure. If for any reason it is
required to change a setting using the overview settings, then the overview
settings can be accessed in the field settings overview [9.I]. See
157].
Export MMI settings
About exporting the configuration settings
Export the configuration settings of the unit to a USB memory stick, via the MMI
(the user interface of the indoor unit). When troubleshooting, these settings can
be provided to our Service department.
#
Code
Description
[9.N]
N/A
Your MMI settings will be exported
to the connected storage device
:
▪
Back
▪
OK
To export MMI settings
1
Open the user interface panel and insert a USB memory stick.
2
1
1
—
2
On the user interface, go to [9.N]
Export MMI settings
.
3
Select
OK
.
4
Remove the USB memory stick and close the user interface
panel.
—
Bizone kit
Additionally to the settings listed below, make sure to also set [7‑02]=1 (i.e. [4.4]
Number of zones
=
Dual zone
) when a bizone kit is installed.
See also
"6.2.3 Multiple rooms – Two LWT zones"
45] and
