Local Configurations
94
4.3.4.2 Configuring Video Detection Settings
Video detection includes motion detection, video loss, and tampering. This function detects the
abnormal changes and trigger alarms.
Select
Main Menu > SETTING > DETECT
.
Step 1
The
DETECT
interface is displayed, see Figure 4-78.
Video detect
Figure 4-78
Select an event type. You can select
Motion Detect
,
Video Loss
, or
Tampering
.
Step 2
Motion Detect: When the moving object appears and moves fast enough to reach
the preset sensitivity value, the system activates alarm.
Video Loss: When the video loss occurs, the system activates the alarms and links
the configured actions.
Tampering: When the camera lens is covered, or the video is displayed in a single
color because of the causes such as sunlight status, the monitoring cannot be
continued normally, and in this case, the system activates alarm.
Select the
Enable
check box.
Step 3
Configure the motion detection area.
Step 4
Perform this step if
Motion Detect
is selected.
1) Next to
Region
, click
Setup
.
The
Setting
interface is displayed. See Figure 4-79.
The region setting interface is divided to 22×18(PAL) or 22×15(NTSC) blocks.
PAL (Phase Alteration Line) applies to the countries and regions including
China and Europe.
NTSC (Nation Television Standards Committee) applies to the countries and
regions including America and Japan.
