Important Safeguards and Warnings
VI
Important Safeguards and Warnings
This Chapter describes the contents covering proper handling of the Device, hazard prevention,
and prevention of property damage. Read these contents carefully before using the Device,
comply with them when using, and keep it well for future reference.
Operating Requirements
Do not place or install the Device in a place exposed to sunlight or near the heat source.
Keep the Device away from dampness, dust or soot.
Keep the Device installed horizontally on the stable place to prevent it from falling.
Do not drop or splash liquid onto the Device, and make sure there is no object filled with
liquid on the Device to prevent liquid from flowing into the Device.
Prevent foreign objects from entering the Device, which might result in damage.
Install the Device in a well-ventilated place, and do not block the ventilation of the Device.
Operate the device within the rated range of power input and output.
Do not dissemble the Device.
Do not transport the Device with the front panel on the bottom.
Transport, use and store the Device under the allowed humidity and temperature
conditions.
Do not expose the Device to water or excessive moisture when washing the car. A failure
to follow this instruction might result in short circuit, fire, or other malfunctions.
The dust on the circuit board will cause short circuit, which affect the normal operation of
the Device and even damage the Device. To make the Device work stably for a long time,
please regularly use the brush to remove the dust from components, including circuit board,
connectors, and chassis.
Keep the Device installed horizontally and make sure the internal anti-vibration
components work properly.
Unlock the HDD box before pulling it out; otherwise there might cause damage to the
Device.
After all the cables are connected, tie up the cables to avoid the dangers such as short
circuit, heat and electric shock resulted from loose cables.
Power Requirements
Improper battery use might result in fire, explosion, or inflammation.
When replacing battery, make sure the same model is used.
Use the recommended power cables in the region and conform to the rated power
specification.
The appliance coupler is a disconnection device. When using the coupler, keep the angle
for easy operation.
Take care to complete the circuit connection. A failure to follow this instruction might result
in Device damage.
