D-Link xStack DGS-3620-52P, Руководство пользователя

Страница: 207 / 1170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
202
Format
config bgp neighbor maximum_prefix [<ipaddr> | peer_group <peer_group_name 16>]
<value 1-12000> {<value 1-100>} {warning_only}
Parameters
<ipaddr> - Specifies the IP address of the neighbor to be configured.
peer_group - Specifies the peer group to be configured.
<peer_group_name 16> - Enter the peer group name here. This name can be up to 16
characters long.
<value 1-12000> - Maximum number of prefixes allowed from the specified neighbor. The default
is 12000.
<value 1-100> - (Optional) Integer specifying at what percentage the maximum prefix limit that
the router starts to generate a warning message. The range is from 1 to 100; the default is 75.
warning_only - (Optional) Allows the router to generate a log message when the maximum
prefix limit is exceeded, instead of terminating the peering session.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This example sets the maximum number of prefixes that will be accepted from the neighbor
192.168.1.1 to 5000, when 50 percent of the maximum prefix limit has been reached. This will
display a warning message:
DGS-3620-28SC:admin# config bgp neighbor maximum_prefix 192.168.1.1 5000 50
Command: config bgp neighbor maximum_prefix 192.168.1.1 5000 50
Success.
DGS-3620-28SC:admin#
12-57 clear bgp flap_statistics
Description
The command is used to clear the accumulated penalties for routes that have been received on a
router that has BGP dampening enabled. If no arguments or keywords are specified, flap statistics
are cleared for all routes.
Format
clear bgp flap_statistics {[<ipaddr> | <network_address>]}
Parameters
<ipaddr> - (Optional) Specifies an IPv4 address to clear the dampening flap statistics.
<network_address> - (Optional) Specifies an IPv4 network to clear the dampening flap
statistics.