D-Link xStack DGS-3620-52P, Руководство пользователя

Страница: 844 / 1170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
839
To show the detailed information on a downstream interface of the multicast routing entry (S, G,
rpt), specify the group address, source address and interface name.
DGS-3620-28SC:admin# show pim6 mroute s_g rpt group FF13::100 source 2001::1111
ipif n20
Command: show pim6 mroute s_g rpt group FF13::100 source 2001::1111 ipif n20
Group Address : FF13::100
Source Address : 2001::1111
Interface Name : n20
Uptime : 150 sec
Have Local Membership : True
Join Prune State : Prune
Prune Pending Timer : 0 sec
Prune Expiry Timer : 15 sec
DGS-3620-28SC:admin#
74-24 show pim6 mroute star_g
Description
This command is used to display the multicast routing information for (*, G) entries generated by
PIM6. Users can get detailed info of the routing entries by choosing the options in the command.
Format
show pim6 mroute star_g {group <ipv6addr> {ipif <ipif_name 12>}}
Parameters
group - (Optional) Specifies the IPv6 multicast group address.
<ipv6addr> - Enter the IPv6 multicast group address used here.
ipif - (Optional) Specifies the IPv6 interface name.
<ipif_name 12> - Enter the IPv6 interface name used here. This name can be up to 12
characters long.
If no parameter is specified, the switch will display all (*, G) entries of the IPv6 multicast routing
table in brief.
Restrictions
None. (EI Mode Only Command)
Example
To show the whole IPv6 multicast routing table of (*, G) generated on the switch:
DGS-3620-28SC:admin# show pim6 mroute star_g
Command: show pim6 mroute star_g
(*, G) Entry Table
-------------------------
Group : FF13::100
Upstream : n2