D-Link xStack DGS-3620-52P, Руководство пользователя

Страница: 205 / 1170

xStack® DGS-3620 Series Layer 3 Managed Stackable Gigabit Switch CLI Reference Guide
200
12-53 config bgp scan_timer
Description
This command is used to configure the BGP scan timer value. BGP will check the next hop
whether it is reachable from the BGP route before the timer expires.
Format
config bgp scan_timer [<sec 5-60> | default]
Parameters
<sec 5-60> - Set the BGP scan timer value from 5 to 60 seconds. Default is 60 seconds
default - Set the BGP scan timer to the default value.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)
Example
This example configures the BGP scan timer to 30 seconds:
DGS-3620-28SC:admin# config bgp scan_timer 30
Command: config bgp scan_timer 30
Success.
DGS-3620-28SC:admin#
12-54 config bgp aggregate_next_hop_check
Description
This command is used to configure the BGP aggregated route
s’ next hop check. Only the routes
with the same next hop attribute can be aggregated if the BGP aggregate next hop check is
enabled.
Format
config bgp aggregate_next_hop_check [enable | disable]
Parameters
enable - Specifies that the BGP aggregate next hop check will be enabled.
disable - Specifies that the BGP aggregate next hop check will be disabled.
Restrictions
Only Administrator, Operator and Power-User level users can issue this command. (EI Mode Only
Command)